Skilled Trades & Construction · Mid-Level (3+ yrs)

Welder Resume

This sample shows a welder’s experience with MIG and stick welding, measuring and fitting parts, and checking finished work. A resume for this job should make the processes, materials, drawings, equipment, and safety practices you know clear to an employer.

Alex Morgan

Welder

  • alex.morgan@example.com
  • +1 555 0100
  • Denver, CO

Summary

Welder with four years of experience in small structural steel and equipment repair shops. Reads fabrication drawings, fits and welds carbon steel parts using MIG and stick processes, and checks work with measuring tools. Completed a general welding safety course.

Experience

Welder at Northline Metal Shop (2022 – Present) - Welded brackets and frames from fabrication drawings using MIG, completing about 12 assemblies per shift. - Measured and fitted carbon steel parts before welding, reducing rework on repeat jobs. - Checked welds visually and with measuring tools, correcting defects before parts moved to finishing. Welder’s assistant at Cedar Bend Fabrication (2020 – 2022) - Cut and ground steel parts with an angle grinder and portable cutting equipment for daily shop orders. - Tack-welded and positioned components with a senior welder, preparing 8 to 10 assemblies per shift.

Education

Vocational welding certificate — Regional Skills Institute (2020) Secondary school diploma — Greenfield Learning Centre (2019)

Skills

  • MIG welding
  • Stick welding
  • Blueprint reading
  • Measuring and fitting
  • Carbon steel fabrication
  • Tack welding
  • Angle grinder
  • Visual weld inspection
  • Workshop safety

Certificates

• Vocational welding certificate • Welding safety course

Equipment

• MIG welding machine • Stick welding machine • Angle grinder

Use this example

Open the builder with this Welder resume, then replace the example with your own details.

Start with an empty resume

Common keywords

Skills and tools often listed for this role. Use only the ones you have, in the job advert's wording. Click one to copy it.

Action verbs

WeldedFittedCutGroundAssembledInspectedRepaired

How to write a Welder resume

Name your welding processes

Put the processes you can use safely near the top, such as MIG, stick, TIG, or flux-cored welding. In each job, say what materials and parts you worked on and whether you followed drawings or welding symbols. Only list a process if you have actually used it; an employer may ask you to show your skills in a practical task.

Show how you check your work

Describe how you prepare, fit, weld, and inspect parts. Useful details include measuring before welding, checking dimensions against a drawing, and spotting visible defects before the next step. Add a modest count or result when you can support it, such as assemblies completed in a shift or fewer parts sent back for rework. Do not claim a perfect record without evidence.

List relevant training and equipment

Give welding certificates, tests, and safety courses their exact names, with dates or expiry dates when relevant. Requirements vary by process, material, project, and employer, so do not describe a general course as a qualification for every welding job. Name equipment you have used, such as a welding machine, grinder, or cutting torch, and be clear about your level of experience.

Make short jobs easy to follow

For temporary shop or site work, list the employer or project and dates clearly, or group similar contracts under a truthful self-employed or contract heading. Include informal repair or fabrication work if it shows relevant skills, and label it honestly. Briefly explain a gap only if it helps; leave out unrelated duties, unsupported quality claims, and tools you have only seen others use.

Questions about this role

How long should a welder resume be?

One page is often enough when you have a few roles and relevant training. If you have several years of varied welding work, a second page can make room for processes, materials, equipment, and project types that match the job. Keep the most relevant experience and current qualifications easy to find, and trim unrelated details.

How can I apply for a welding job with little formal experience?

Include supervised practice, an apprenticeship, course projects, farm or household repairs, and informal paid work if you did the work yourself. State where and when you gained the experience, what process and material you used, and whether someone supervised you. Be accurate about your ability; employers may ask for a practical demonstration or a welding test.

Which welding certificates should I list?

List the welding process or test qualification you hold, its scope if known, and whether it is current. Add relevant safety training and equipment certificates only if you earned them. Names, renewal periods, and employer requirements differ by country and job, so check the vacancy and describe your credential accurately instead of implying it qualifies you for every process or project.

Should I include short-term, seasonal, or contract welding work?

Yes, if it is relevant. Show the dates and identify the role as temporary, seasonal, or contract so the timeline is clear. You can group several similar short assignments under one heading if you label them honestly and name the kinds of work performed. Focus on processes, materials, parts, and shop or site tasks you personally handled.